Read our Product Blog located here: Click to purchase the Loop-Loc Brass Anchor Pulling Tool Kit that's featured in this video: Be sure to watch our other GLI Brass Anchor Removal Kit video at: Shop all of our swimming pool winterization items including additional safety cover hardware at: For more info, subscribe to our channel: Family-owned since 1989, E-Z Test Pool Supplies has 3 retail stores in the Southern NH and Metro-Boston area, plus an extensive online store for all things pool related. There’s a fix which doesn’t involve drilling a brand-new hole and is very economical. So, when the anchor is hammered in, the ridges dig in and get compressed, which holds the anchor in place.Are Your Brass Safety Cover Anchors Giving You Trouble? Maybe they won’t come up, won’t turn down, or just spin in the hole forever? A Brass Anchor Pulling Tool Kit allows you to replace your stuck anchor in minutes! Don’t let this issue lead to scraped up hands, and increased frustration. The hole for the anchor is 3/4", but the top ridges are slightly larger. Use this handy tool to assist in removing and installing loop loc springs from the anchors. To keep the hole saw steady without wobbling, you can first drill a hole in a piece of wood and then put that hole over the anchor then drill through the hole. LOOP-LOC Installation / Removal Tool - Stainless Steel. If you use a 3/4" hole saw to drill the top part of the anchor, that will remove the ridges around the top of the anchor, which will reduce the risk of surface damage.
Scoring around the anchor a little bit and having the copper coupling sit in the scored area should reduce the risk of surface damage, but pulling an anchor always risks damaging the deck. Then, hold the bolt and tighten the coupling nut to pull the anchor. The bolt will need to be about 6 to 8 inches long to accommodate the anchor, coupling and coupling nut. Then, screw in a long 5/16-18 bolt with 2 big washers and a coupling nut above the washers. The metal tube should have an inside diameter just slightly larger than an anchor.
A 3/4" copper coupling should fit the scored area around the anchor. Then, drill and tap the center hole with a 5/16-18 tap.
To remove an anchor, first lightly score around the anchor to reduce contact with the deck. Be patient and keep adding water to flush out the grit and it will come out. Just put some water on the screw and work it in by moving the screw back and forth until the water loosens the dirt. If an insert will move at all, you can get it out.
0 kommentar(er)
